Scan matching is a widely used technique in state estimation. Point-cloud alignment, one of the most popular methods for scan matching, is a weighted least-squares problem in which the weights are determined from the inverse covariance of the measured points. An inaccurate representation of the covariance will affect the weighting of the least-squares problem. For example, if ellipsoidal covariance bounds are used to approximate the curved, "banana-shaped" noise characteristics of many scanning sensors, the weighting in the least-squares problem may be overconfident. Additionally, sensor-to-vehicle extrinsic uncertainty and odometry uncertainty during submap formation are two sources of uncertainty that are often overlooked in scan matching applications, also likely contributing to overconfidence on the scan matching estimate. This paper attempts to address these issues by developing a model for range-azimuth-elevation sensors on matrix Lie groups. The model allows for the seamless incorporation of extrinsic and odometry uncertainty. Illustrative results are shown both for a simulated example and for a real point-cloud submap collected with an underwater laser scanner.

Robotic Wire Arc Additive Manufacturing (WAAM) is a metal additive manufacturing technology, offering flexible 3D printing while ensuring high quality near-net-shape final parts. However, WAAM also suffers from geometric imprecision, especially for low-melting-point metal such as aluminum alloys. In this paper, we present a multi-robot framework for WAAM process monitoring and control. We consider a three-robot setup: a 6-dof welding robot, a 2-dof trunnion platform, and a 6-dof sensing robot with a wrist-mounted laser line scanner measuring the printed part height profile. The welding parameters, including the wire feed rate, are held constant based on the materials used, so the control input is the robot path speed. The measured output is the part height profile. The planning phase decomposes the target shape into slices of uniform height. During runtime, the sensing robot scans each printed layer, and the robot path speed for the next layer is adjusted based on the deviation from the desired profile. The adjustment is based on an identified model correlating the path speed to change in height. The control architecture coordinates the synchronous motion and data acquisition between all robots and sensors. Using a three-robot WAAM testbed, we demonstrate significant improvements of the closed loop scan-n-print approach over the current open loop result on both a flat wall and a more complex turbine blade shape.

Surface cracks in infrastructure can lead to significant deterioration and costly maintenance if not efficiently repaired. Manual repair methods are labor-intensive, time-consuming, and imprecise and thus difficult to scale to large areas. Breakthroughs in robotic perception and manipulation have advanced autonomous crack repair, but proposed methods lack end-to-end testing and adaptability to changing crack size. This paper presents an adaptive, autonomous system for surface crack detection and repair using robotics with advanced sensing technologies. The system uses an RGB-D camera for crack detection, a laser scanner for precise measurement, and an extruder and pump for material deposition. A novel validation procedure with 3D-printed crack specimens simulates real-world cracks and ensures testing repeatability. Our study shows that an adaptive system for crack filling is more efficient and effective than a fixed-speed approach, with experimental results confirming precision and consistency. This research paves the way for versatile, reliable robotic infrastructure maintenance.

The creation of precise and high-resolution crop point clouds in agricultural fields has become a key challenge for high-throughput phenotyping applications. This work implements a novel calibration method to calibrate the laser scanning system of an agricultural field robot consisting of two industrial-grade laser scanners used for high-precise 3D crop point cloud creation. The calibration method optimizes the transformation between the scanner origins and the robot pose by minimizing 3D point omnivariances within the point cloud. Moreover, we present a novel factor graph-based pose estimation method that fuses total station prism measurements with IMU and GNSS heading information for high-precise pose determination during calibration. The root-mean-square error of the distances to a georeferenced ground truth point cloud results in 0.8 cm after parameter optimization. Furthermore, our results show the importance of a reference point cloud in the calibration method needed to estimate the vertical translation of the calibration. Challenges arise due to non-static parameters while the robot moves, indicated by systematic deviations to a ground truth terrestrial laser scan.

Care robotics as a research field has developed a lot in recent years, driven by the rapidly increasing need for it. However, these technologies are mostly limited to a very concrete and usually relatively simple use case. The bimanual robot House of Living Labs intelligent Escort (HoLLiE) includes an omnidirectional mobile platform. This paper presents how HoLLiE is adapted, by flexible software and hardware modules, for different care applications. The design goal of HoLLiE was to be human-like but abstract enough to ensure a high level of acceptance, which is very advantageous for its use in hospitals. After a short retrospect of previous generations of HoLLiE, it is highlighted how the current version is equipped with a variety of additional sensors and actuators to allow a wide range of possible applications. Then, the software stack of HoLLiE is depicted, with the focus on navigation and force sensitive intention recognition.

With the need to feed a growing world population, the efficiency of crop production is of paramount importance. To support breeding and field management, various characteristics of the plant phenotype need to be measured -- a time-consuming process when performed manually. We present a robotic platform equipped with multiple laser and camera sensors for high-throughput, high-resolution in-field plant scanning. We create digital twins of the plants through 3D reconstruction. This allows the estimation of phenotypic traits such as leaf area, leaf angle, and plant height. We validate our system on a real field, where we reconstruct accurate point clouds and meshes of sugar beet, soybean, and maize.

Large indoor spaces have complex layouts making them difficult to navigate. Indoor spaces in hospitals, universities, shopping complexes, etc., carry multi-modal information in the form of text and symbols. Hence, it is difficult for Blind and Visually Impaired (BVI) people to independently navigate such spaces. Indoor environments are usually GPS-denied; therefore, Bluetooth-based, WiFi-based, or Range-based methods are used for localization. These methods have high setup costs, lesser accuracy, and sometimes need special sensing equipment. We propose a Visual Assist (VA) system for the indoor navigation of BVI individuals using visual Fiducial markers for localization. State-of-the-art (SOTA) approaches for visual localization using Fiducial markers use fixed cameras having a narrow field of view. These approaches stop tracking the markers when they are out of sight. We employ a Pan-Tilt turret-mounted camera which enhances the field of view to 360{\deg} for enhanced marker tracking. We, therefore, need fewer markers for mapping and navigation. The efficacy of the proposed VA system is measured on three metrics, i.e., RMSE (Root Mean Square Error), ADNN (Average Distance to Nearest Neighbours), and ATE (Absolute Trajectory Error). Our system outperforms Hector-SLAM, ORB-SLAM3, and UcoSLAM. The proposed system achieves localization accuracy within $\pm8cm$ compared to $\pm12cm$ and $\pm10cm$ for ORB-SLAM3 and UcoSLAM, respectively.

The recent adoption of the Robot Operating System (ROS) as a software standard in robotics has contributed to novel solutions for several problems on the area. One such problem is known as Simultaneous Localization and Mapping (SLAM) with autonomous navigation, for which a number of algorithms from different classes are available as ROS packages ready to be used on any compatible robot. Many anticipated applications of autonomous mobile robots require for them to navigate in diverse complex environments without support from exterior infrastructures. To perform this on-board navigation, the robot must make use of the available sensor technologies and fuse the most reliable data respective to the present environment in an adaptive manner and optimize the algorithm parameters prior to the actual implementation to reduce the workaround time. This paper will review recent efforts to develop onboard navigation systems which can seamlessly transition between outdoor and indoor environments and different terrains seamlessly using Gazebo simulator with ROS integration. The methodologies surveyed include SLAM, Odometry and Localisation. An overview of the state-of-the-art is provided with a focus on approaches which are adaptive to dynamic sensor uncertainty, dynamic objects and dynamic scenes. The experiences reported on this work should provide insight for roboticists seeking an Autonomous SLAM solution for indoor applications.

Studies show dramatic increase in elderly population of Western Europe over the next few decades, which will put pressure on healthcare systems. Measures must be taken to meet these social challenges. Healthcare robots investigated to facilitate independent living for elderly. This paper aims to review recent projects in robotics for healthcare from 2008 to 2021. We provide an overview of the focus in this area and a roadmap for upcoming research. Our study was initiated with a literature search using three digital databases. Searches were performed for articles, including research projects containing the words elderly care, assisted aging, health monitoring, or elderly health, and any word including the root word robot. The resulting 20 recent research projects are described and categorized in this paper. Then, these projects were analyzed using thematic analysis. Our findings can be summarized in common themes: most projects have a strong focus on care robots functionalities; robots are often seen as products in care settings; there is an emphasis on robots as commercial products; and there is some limited focus on the design and ethical aspects of care robots. The paper concludes with five key points representing a roadmap for future research addressing robotic for elderly people.

A semi-autonomous prosthesis control based on computer vision can be used to improve performance while decreasing the cognitive burden, especially when using advanced systems with multiple functions. However, a drawback of this approach is that it relies on the complex processing of a significant amount of data (e.g., a point cloud provided by a depth sensor), which can be a challenge when deploying such a system onto an embedded prosthesis controller. In the present study, therefore, we propose a novel method to reconstruct the shape of the target object using minimal data. Specifically, four concurrent laser scanner lines provide partial contours of the object cross-section. Simple geometry is then used to reconstruct the dimensions and orientation of spherical, cylindrical and cuboid objects. The prototype system was implemented using depth sensor to simulate the scan lines and vibrotactile feedback to aid the user during aiming of the laser towards the target object. The prototype was tested on ten able-bodied volunteers who used the semi-autonomous prosthesis to grasp a set of ten objects of different shape, size and orientation. The novel prototype was compared against the benchmark system, which used the full depth data. The results showed that novel system could be used to successfully handle all the objects, and that the performance improved with training, although it was still somewhat worse compared to the benchmark. The present study is therefore an important step towards building a compact system for embedded depth sensing specialized for prosthesis grasping.